ALL CALPUMP PRODUCTS

Calpump Waterfall Pumps are solidly constructed with non-corrosive components, ceramic mechanical seal and a brass insert in the 1 1/4" FNPT discharge. Their water cooled design ensures safe and efficient operation without fear of harm to ornamental fish or aquatic plants.

• Pump construction is completely non-corrosive
• 20' 16-gauge power cord for convenience
• Heavy duty motor shaft bearings for longevity
• Water cooled - no oil
• Ceramic mechanical seal

• Oil-Free, Will Not Contaminate Aquatic Life
• Low Energy Consumption
• Inlet/Outlet:
  • T 1500 : 1" MPT
  • T 4000 : 1 1/2" MPT
  • T 7500, T10000 : 3" MPT

Features & Benefits:
• Uses up to 40-60% less electricity than direct drive pumps
• 1-1/2" FNPT discharge
• 1-1/2" MNPT suction
• 20' power cord
• No seals, no oil
Pump Applications:

Waterfalls, Streams, Fountains, Water Displays, Bio filters, Ultraviolet Filters and Koi Ponds

Calpump's stainless steel and bronze pond pumps are very reliable. Typically used in Koi or goldfish ponds to power filters and waterfalls, they can also be used with mid-size to large fountain nozzles. The S580, S900 and S1200 gph models have a 3/4" MPT intake and a 1/2" MPT outlet that easily accommodates 3/4" flexible tubing. All of these models must have either a screen or foam pre-filter attached to the intake. We highly recommend using the MAN foam filters. These pumps can easily be connected to biological filters, ultraviolet sterilizers, ultraviolet clarifiers and in pond filters.

This 3 1/2 inch tall 10 Watt all purpose Egglite can be used wet or dry, and is suitable for fresh, salt, or chlorinated water.

• Can be used in or out of water
• Tempered clear glass front lens
• 4 color lenses - blue, red, green, amber
• 10 foot cord
• Magnetic base

This 3 1/2 inch tall 20 Watt all purpose Egglite must be fully submerged, and is suitable for fresh, salt, or chlorinated water.

115 volt, 250 watt Calpump High Output Light with tungsten halogen bulb. Must be totally submerged in water to keep light cool. Includes a 20 or 50 foot power cord and swivel stand for easy placement. UL listed and thermally protected. Not for swimming pool use or to be recessed in any way. Colored lenses not included, but may be purchased separately.

• Swivel stand included 
• Stainless steel case with heavy cast brass grill
• 7.3" diameter

The Power Control Center allows backyard water gardeners the flexibility of installing a pond where no electricity is near the pond site. Now you can control the operation of your lighting and other necessary low voltage items with the Power Control Center. The ultimate luxury to power your pond. 150 watts of low voltage power for lighting and 10 amp maximum line voltage for pumps, UV's, etc.

• Line voltage & low voltage programmable timers
• Dual 110V (10 amp max.) and 12 volt (150 watt maximum)
• Weather resistant construction for safety and durability
• Power cord and Mounting bosses for easy installation
• Dimensions: 6" x 8" x 5.5"