All Vacuums & Maintenance

Tough Nitrile coating resists chemicals, punctures & abrasion. Comfortable cotton lining with great grip, wet or dry!

Atlas 690 triple dipped oil resistant PVC glove with extra long shoulder length sleeve.

Helps keep ponds neat and well manicured without getting hands wet. The Scissor Head cuts and removes leaves from pond plants in one easy step. The Pincher Head allows grasping and removal of debris with ease and precision.

Laguna Pond Vac provides a fast and convenient way to clean your pond. The vacuum is powered by water and does not require electricity. Simply attach it to a garden hose and the control valve allows you to adjust the water flowing through the vacuum.

• Power Vac attachment which collects dirt and debris at the bottom of the pond.
• Hydro Brush attachment for scrubbing and cleaning.
• Filter bag.
• Extension pole.

The suction motor will vacuum up to 1500 gph. The internal discharge motor is 1 HP and is capable of discharging your dirty water under pressure up to 18 feet in elevation. The motors are balanced in flow rate so vacuum job is continuous without interruption. The 6 foot extension pipe combines with 26 feet of suction hose allowing for easy handling during even your biggest pond vacuum jobs. 4 different size vacuum heads are included. Debris is vacuumed into the 13 gallon holding tank whereby large solids are collected into a pre-filter bag first. The dirty water is then pumped out to waste by the action of the internal 1 HP sludge pump. 32 ft of exhaust hose allows the waste water to be pumped to any elevation up to 18 feet high. Total working distance is over 60 feet. An optional secondary exhaust hose can be added onto the end of the discharge hose to gain an additional 32 ft if needed.

This innovative “Power” vacuum is very versatile and can be used in a variety of applications.

• Pond Cleanouts
• Filter Tank Cleanouts
• Basement Floods
• Household Carpet Floods

Uses a single-chamber suction system. This means that the vacuum fills with material removed from the pond and then automatically shuts off via an internal float and drains via gravity. The vacuum will typically fill in 20-40 seconds and then discharge in 20-30 seconds. This type of vacuum is only suitable for small applications and will require some patience due to the on/off cycle.

The Matala Pond Vac II, also known as the MuckBuster, offers a 2 H.P. motor made with the highest quality German manufactured components. Suction tests were four times more powerful than its competition with a suction lift 5' above water.

• Collection container with motor casing and 16 ft cable.
• 8 ft. discharge hose with integrated blocking flap.
• 16 ft. suction hose
• 5 extension tubes.
• Adjustable floor nozzles (for particle size 1/10",.1/5",3/8")
• 1 Sludge collection bag.
Please review the operational instructions for additional information 
(click the red PDF symbol next to the price below).