Matala Air Diffusers & Manifolds

Matala Air Disc Diffusers are available in 3", 7", 9" and 12" diameter sizes. Made of high quality EPDM rubber for use in water gardens, aquaculture and waste water treatment industries. Precision perforated I-shaped slits open when airflow is present and close when airflow is stopped, which increases durability and longevity, as well as cleanliness.  These diffusers offer the lowest back pressure in the market.

MD-3W and MD-7W have weighted bases. MDB11 and MDB22 features a hollow base that can be filled with sand or gravel.

These discs are very low maintenance and in some cases no maintenance. Simply wash the disc with clean water and bleach if it ever needs cleaning.

Matala circular diffusers are made from recycled rubber with specially designed pore sizes to create fine air bubbles. They are self-weighted and are fitted with a stepped barbed fitting that will accept most 3/8", 1/2" and 5/8" ID tubing.

• Made from recycled rubber
• Self-weighted
• Recommended air flow: 0.30 CFM

Matala Hakko Air Tube Diffusers are designed to be a drop-in system. The rubber membrane is wrapped around a hollow PVC tube. The air holes are a little larger than other brands, so you get medium-sized bubbles which do not clog and put very little back-pressure on your system. This means very low maintenance and effective aeration system.

Can be filled with rocks or gravel in order to be weighted down.

A simple, effective, reliable and economic way to aerate ponds, lakes and aquaculture farms. Made from high-efficiency rubber with special designed pore size and its numerous pore distribution to create maximum fine bubbles which slowly release in the water. This consistent oxygenation enhances water quality and clarity, benefiting fish, aquatic plants, beneficial bacteria, and overall pond health. Designed for efficiency, the tubing operates best with an air flow rate of 0.45-1.1 CFM per linear foot. 

• Recommended air flow: 0.45-1.1 CFM per linear foot
• Durable with low start up, maintenance and replacement cost
• Can be cut into smaller sections
• 1/2" ID non-weighted

Matala Heavy Duty Air Manifolds are built tough. Heavy brass construction for dependable use. The manifolds are available in 2-way or 4-way. The inlet barb which connects to the air pump is a 3/4" barb. The outlet barbs are available in 3/8", 1/2" or 5/8".