Chemical algae treatment formulated to control green water and string algae.
Compare to AlgaeFix, same active ingredient and 20% more concentrated.
Algaecide For Ponds - Stops Algae Growth & Controls string algae!
No more green water with ALGAWAY 5.4 Algaecide!
It stops algae growth in ponds and can be applied to areas that contain fish and plants!
For use in self-contained ornamental ponds and fountains without any outflow. For small ponds with heavy algae growth, clean the excess algae off the sides and ornaments before adding ALGAWAY 5.4 . This will reduce the amount of decaying organic matter.
Fountains, Small Ponds with goldfish and koi - Treat only those fountains and ponds which will have no outflow after treatment. High water temperatures cause more rapid natural decay of dead algae which can cause fish distress. If animals are present clean out excess algae as stated above or use before temperature exceeds 75°F (24°C).
CAUTIONS: In ponds, insure that water is well aerated via waterfall, fountain or other method to prevent fish loss. Aeration must be continuous. Not safe for use with snails, shrimp and other crustaceans or mollusks.
Repeat dosage once per week.
Microbe-Lift Algaway Application Rates | |||
---|---|---|---|
Volume of water to treat (gallons) | Dosage | ||
360 gallons | 1 oz | ||
SKU | Size | Treats (up to) | |
---|---|---|---|
20398 |
8 oz |
2,839 gallons |
Break Down Unsightly Debris! Microbe-Lift Oxy Pond Cleaner will safely yet immediately breakdown accumulated debris from rocks, streams and on waterfalls. Microbe-Lift OPC, Oxy Pond Cleaner will safely spot-treat all areas of light-to-heavy accumulations of debris on rocks, waterfalls, streams, planters, etc. Microbe-Lift Oxy Pond Cleaner is 100% safe when used as directed.
Directions: Microbe-Lift OPC, Oxy Pond Cleaner is not temperature sensitive but works best in warmer weather. To achieve the best results, manually clean out as much accumulated debris from the pond as possible and shut down waterfalls before cleaning. Do not dilute. To treat areas with debris build up, sprinkle over areas needing treatment. Make direct contact but avoid live plants where possible. To maintain a continued proper ecosystem in your pond, always add Microbe-Lift PL, or any bacterial/enzymatic treatment, 48 hours after using Microbe-Lift Oxy Pond Cleaner.
Before Use: Use Microbe-Lift Ammonia Test Strips to test for the presence of ammonia in your pond water. If ammonia levels are above 0.8mg/L, DO NOT apply Microbe-Lift OPC, Oxy Pond Cleaner until the ammonia level is brought down below 0.8mg/L. If ammonia levels exceed 1.0mg/L, add Microbe-Lift Ammonia Remover.
After Use: Ammonia levels should be monitored for two days following applications of ANY/ALL oxygen release compounds as they can kill beneficial bacteria in a pond/lake resulting in an ammonia or nitrite spike. Use Microbe-Lift Ammonia Test Strips to test for the presence of ammonia. If your ammonia levels exceed 1.0mg/L., add Microbe-Lift Ammonia Remover to reduce the ammonia level to 0.8mg/L or below.
Microbe-Lift Oxy Pond Cleaner Application Rates | |||
---|---|---|---|
Pond Size (gallons) | Weekly Maintenance (No Existing Debris) | Light Debris Accumulation | Heavy Debris Accumulation |
80 - 200 | .75 oz. | 1 oz. | 1.5 oz. |
201 - 500 | 1.5 oz. | 2 oz. | 3 oz. |
501 - 1,000 | 4 oz. | 6 oz. | 8 oz. |
1,001 - 1,500 | 6 oz. | 8 oz. | 12 oz. |
1,501 - 2,500 | 8 oz. | 12 oz. | 16 oz. |
Large Ponds & Lakes | |||
Apply around perimeter of pond/lake as much as needed | |||
Pond Cleaning/Non-Painted Surfaces | |||
96 oz. per 1,000 sq. ft. of surface area to be cleaned |
SKU | Size | |
---|---|---|
26302 |
2 lbs |
Chemical Algae Eliminator Formulated for Decorative Ponds & Fountains, Irrigation Ponds, Water Hazards & Retention Ponds
Do NOT use with fish
Not for sale, use or distribution in New York or California
E.P.A. Registration Number 1448-114-74466
SKU | Size | |
---|---|---|
20376 |
32 oz |