De-icers & Heaters

• Maintains a vent hole in the pond for proper gas exchange, saving the lives of your fish
• Safe for plastic and liner ponds
• LED light glows when de-icer is on
• Thermostatically controlled to operate only when necessary
• 22 ft. power cord

The Laguna 500 watt Power Heat pond heater will keep an area thawed and open in the pond during the cold winter months, allowing the release of toxic gases from fish respiration and decomposing organic matter to escape. At the same time it allows oxygen to re-enter the pond. Safe for plastic and liner ponds, the pond de-icer will not harm fish or plants. The heater has dual zone integrated thermostats to help the heat distribution. 

• Dual zone integrated thermostats
• Stainless steel housing for even heat distribution and corrosion resistance
• Maintains a vent hole in the pond for proper gas exchange
• Safe for plastic and liner ponds
• LED light glows red when de-icer is on
• 22 ft power cord

The Aquascape Pond De-Icer is the ideal pond heater for keeping a small hole opening in the ice during cold winter months, and ensures proper gas exchange helping keep fish alive during the winter. Energy efficient and the stainless steel construction prevents corrosion throughout the year, providing years of trouble-free operation. The internal thermostat acts as a safty feature and signals a built-in LED light indicating when the de-icer is in use.

• Stainless steel construction prevents corrosion and cracking
• Integrated thermostat saves electricity
• Built-in LED light indicates when heater is in use
• 22 ft power cord
  

The Atlantic Pond De-icer is a floating pond heater that helps maintain a hole in the ice to allow the exchange of oxygen and other gases in wintry conditions. It allows oxygen to diffuse into pond water otherwise sealed off by ice, while toxic carbon dioxide and methane gasses from decomposing organics diffuse out.

• Constructed of high strength and high temperature PPS polymer for incredible durabilty under the most adverse conditions
• Internal thermostat turns heater on just above freezing and off as water warms for fully automatic operation
• Efficient heating element only draws 300 watts when needed to keep operating costs low
• Indicator light shines blue to show the De-icer is in standby mode when plugged in with water temperature above freezing
• Indicator light shines green to show water temperature is below freezing and De-icer is in operation.

The Tetra Pond De-Icer is a floating pond heater ideal for maintaining a small hole in the ice during cold winter months, ensuring proper gas exchange helping keep fish alive during the winter. The natural faux stone design helps the unit blend seamlessly into your ponds setting.

• Maintains a vent hole in the pond for proper gas exchange, saving the lives of your fish
• Effective to -20°F (-18°C)
• Natural stone finish blends with your pond's surroundings
• Thermostatically controlled to operate only when necessary, saving you money

The Pondmaster floating de-icer is the ideal pond heater for smaller sized ponds, for use in colder locations where typical winters result in significant or long-term icing of pond surfaces. The unique doughnut-shaped design maintains an ice-free center area that allows the accumulated toxic gases to escape from the trapped pond water thus promoting a healthier environment for aquatic and plant life.

• 120 watts of heating power - extremely energy efficient
• Internal electronics epoxy-sealed for watertight protection
• Double watertight seal
• Safe for rubber liner and preformed ponds
• Thermostatically controlled to operate only when necessary, saving you money

The Anjon floating de-icers maintain an opening in the ice during winter months, ensuring proper gas exchange and helping fish survive the winter. An internal thermostat turns the pond heater on just above freezing and off as water warms for a fully automatic operation. Safe for plastic and liner ponds, the pond de-icer will not harm fish or plants. 

• Allows natural gases to escape
• Engineered for 24 hr continuous use
• Safe for all aquatic life, and safe for your pond liner

The Oase IceFree 4 Seasons can be used year-round. In colder seasons, it circulates warm water from the bottom to maintain a small hole around the float body, no heating element necessary. In summer it can be used as an efficient and inexpensive aerator. Requires a depth of at least 30" for unit to function in low temperatures.

• Keeps an area of the pond free of ice in the winter
• In summer it can be used as a water feature to aerate your pond
• Requires a minimum depth of at least 30"
• Includes: Pump w/ filter housing, float body, 2 nozzle heads, filter bag, hose and connector, nozzle pipe, and stop plug

The Scott Aerator Slinger De-Icer can be suspended from a boat, pilings or dock by using nylon ropes (included) to fasten. This de-icer removes and prevents ice by bringing warmer water from the bottom and sending it out in a continuous agitated movement. It easily adjusts to compensate for varying water levels, and its heavy-duty design holds up in fresh and salt waters. Made for use in hard-to-reach areas and rapidly changing conditions, it's an economical solution to ice formation in large marinas and dock areas.

• 400 gallons-per-minute flow rate.
• Oil-free, environmentally friendly motor means no oil leaks!
• Rugged, high-density polyurethane-and-stainless steel construction.
• Motor specs: 115-volt, 60 Hz, single phase, 10 amps, 680 watts. We also have 230-volt, many variations of 3-phase, and 50-Hz models available.
• 12-gauge, heavy-duty submersible electric cord with Hubbell marine-grade plug included.

Kasco De-icers push warm bottom water to the surface creating an ice-free area of protection around your boat, dock, pier, or other in-water property. They help protect fish and aquatic species, by allowing for open areas where oxygen can enter the water. Use de-icers year-round for improved health and beauty of your water. Available in 1/2, 3/4, and 1 HP unit sizes.

• Offered as 110-120V and 208-240V (60Hz)
• Includes (2) 20 ft. mooring lines for suspended operation

Optional: Universal Mount - allows de-icer to be mounted on docks, pilings and other waterfront property. Featuring durable stainless steel, this easy to assemble and install mount allows units to be lowered, angled and positioned in several orientations to provide proper water movement. Uses a 1" nominal threaded or unthreaded pipe (supplied by customer).

The Ice Eater, the original De-Icer, is the leader in quality, durability, and performance. It is designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water.

HOW IT WORKS: The Ice Eater’s propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation and melts existing ice. The design of the Ice Eater’s venturi shroud (white housing) with outwardly flared ends, provides more upward thrust & draws warmer water from greater depths than other conventional de-icers.

WHY BUY THE ORIGINAL DE-ICER?: Ice Eater is shipped complete with suspension lines and shackles. Therefore, it can be taken out of the box, hung from a boat, dock, or pier and plugged in. Just move a shackle from one hole to another hole on the top rim, and you can quickly change the angle the Ice Eater is suspended at. The average operating depth of the Ice Eater is between 2 - 3 feet, but for best performance, ensure there is at least one foot between the Ice Eater and the seabed.

• Custom designed and engineered for maximum efficiency and performance in all climates.
• Agitates more fresh-water & salt-water than any other de-icer on the market.
• Patented heavy-duty PVC venturi housing designed for superior water flow.
• Bronze end-bell ensures a long life without cracking or warping.
• Quick-disconnect power cord allows for easy replacement.

Motor Assembly comes with Motor Canister, Aluminum Anode, Propeller, Brackets, and Power Cord.

An Ice Eater Replacement Motor Assembly is the perfect option to buy when you already have a shroud from an older or broken Ice Eater. Shroud, Mooring Lines, & Shackles are NOT included.

GCTek Thermakoi heaters are just the thing when you need to easily heat your koi pond. The smallest unit the 1.5 KW unit plugs into a regular 115V outlet and the 2 larger sizes, 6 KW and 11 KW are hardwired (230V) into the built in junction box that comes with the units.

Made of 316 stainless steel and utilizing highly accurate electronic thermostats these units keep the water temperature constant. Installs easily and quickly - just plumb in line (2") entering the water at the end with the Safety flow switch and out the other end to the pond.