All Spillways and Weirs

The Aquascape Waterfall Spillway is a cost-effective way to create the starting point on any waterfall or stream, providing a smooth consistent water flow. The spillway is a versatile tool that can be used in a wide variety of water feature applications. As the incoming water rushes in, the water is diffused by strategically positioned internal barriers, creating smooth flow of water.  Ideal solution for pondless disappearing waterfall systems where large and expensive biological filters are not necessary. It can also be installed as an additional waterfall or stream onto a new or existing pond. Its durable design allows boulders, gravel, soil or other creative landscape material to be set directly on top, making it easy to camouflage into the surrounding landscape. 

Features:

• Creates a smooth and consistent water flow for waterfalls
  
• Low profile and durable design
• Handles the weight of stone boulders for concealment
• Includes 2" PVC slip and barbed fitting

Wall Spouts are designed for use in formal water feature applications utilizing an enclosed basin or open basin. They can install easily into most retaining walls. The solid brass construction with oil rubbed bronze finish will provide you with years of lasting enjoyment.

• Solid brass fixtures with oil rubbed bronze finish
• 1½" inlet for smooth water flow
• Integrated drip edge to eliminate blackflow down the wall
• Includes grounding log for bonded systems

Easily add a waterfall or stream to a new or existing water feature. Because of their rugged design and HMWPE construction, Fastfalls also comes with Atlantic's exclusive lifetime warranty.

Each FastFalls includes bulkhead, liner attachment flange, splash reduction foam and top grate.

Incredibly strong one-piece units feature an internal baffling system, support cones and re-enforced spillway. The innovative "inside the liner" design and rear liner attachment simplifies installation. Cover with rock, gravel, soil or mulch to blend with your surrounding landscape.

• Spillway boxes diffuse incoming water flow to create starting points to streams and waterfalls
• Designed to make plumbing the top of the waterfall as easy as possible
• Innovative rear liner attachment simplifies installation and eliminates leakage due to settling
• Crush-proof design with internal baffles stabilized by support cones carries the weight of stone
• Reinforced spillway lip retains rock, gravel, mulch or soil
• Includes installation kit, male thread adapter and one-piece liner flange

Faster to install and Tougher spillway than any other spillway on the market

• Ideal for use at beginning of streams and in block walls, pools and formal fountains
• Low profile design of only 3-1/2"
• Extra strong vertical rib design creates a nearly indestructible diffuser
• Dual 2" inlets

Ideal for building natural looking waterfalls or formal features!

Item does not include diffuser

EasyPro offers the largest selection of waterfall spillways in the industry! Waterfall spillways are the perfect choice for Just-A-Falls (pond-less) systems, signs, swimming pool features and other installations where a cascade of water is desired and filtration is not needed.

Measurements: 23-1/8" x 7" x 3-1/2"

Creates 16" Wide Waterfall

Enjoy hours of relaxation as your pond recreates the beauty of nature.

• No glue liner connection - all compression seal securely holds liner in place without adhesives.
• Easily connect 2" flexible or rigid PVC tubing to the rear inlet (not shown). Adapts to other types and sizes of tubing with fittings sold separately.
• Bio-mechanical filtration.
• Super strong injection molded housing.
• Use multiple units for a wider waterfall.
• Rated for pump flow rates of 900-3000 gph

Atlantic's NEW Stainless Steel Scuppers bring a gleaming new dimension to our spillway line. Constructed of durable 304 stainless steel and available in the same sizes as our popular Colorfalls, these sleek modern Scuppers put a sharp, fresh shine on your formal water feature project.

• Fully welded enclosure
• 304 Stainless steel

Colorfalls is a lighted weir specifically designed for water features. Fits perfectly in formal retaining walls and pond-free applications. A breathtaking new dimension to a water feature.

• 1 ½" FIPT Inlet
• 5" Lip Extension
• Formal Application

Colorfalls is a lighted weir specifically design for water features. Fits perfectly in formal retaining walls and pond-free applications. A breathtaking new dimension to a water feature.

• 1 1/2" (Sch 40) side and back plumbing options for maximum versatility
• Self-draining body for easy winterization
• Redesigned supports eliminate splitting of the water sheer and increase load capacity
• Removable baffle for ease of cleaning and service
• Color Changing LED light bar that is accessible from the rear of the unit
• 16 different colors
• Formal Application

Atlantic Basin Kits are designed to fit perfectly with all of our formal spillways - the Color Changing Colorfalls, the Classic Colorfalls and our new Stainless Steel Scuppers. Whether you're adding the shimmering nighttime enchantment of a Colorfalls or an elegant touch of class with a Stainless Steel Scupper, our Basin Kits provide everything you need to complete the installation, from the reservoir to the plumbing to the pump, with all the fittings, double filtration, splash mat, even an Automatic Fill Valve!

Want an elegant new way to control splash? Our new Stainless Steel Splash Rings tame errant droplets and complement all of our formal spillways, with 304 Stainless mesh and sides so all you see is polished steel. Add a new SOL Light Ring for a dramatic nighttime effect!

05460 Recommended To Use With: CFBASIN12 (04692)

05477 Recommended To Use With: CFBASIN24 (02391)

05484 Recommended To Use With: CFBASIN36 (04685)

Ideal for small statues, vases or rocks where splash is minimal. Has the thickest, strongest grating  of any similar product. Roto-molded for superior strength. 

• Pump access door for easy pump removal and cleaning. 
  
• Fine mesh screen included

• Ideal for use with light weight resin type statuary pieces
• Clear span grating - no legs for easy pump installation and removal
• 100 lb load rating with grating only
• 500+ lbs when used with concrete blocks under grating
• 40" and 48" sizes available

Vianti Falls stainless steel spillways are a stylish highlight for your patio, entry way or as a stand alone water feature. The soothing sheet of water adds beauty and elegance to any landscape. EasyPro Vianti Falls Spillways are made with stainless steel for maximum strength!

• Available in a variety of sizes and styles
• LED light strips can be used on spillways
• Internal baffle calms incoming water " creating even, smooth flow over lip
• Ideal for formal features, signs and swimming pool features
• Rated for 600 GPH per foot of width
• Max drop of 4 ft. If higher, the water sheet will begin to break apart.

EasyPro Fittings for Vianti Falls Spillway are not included with the spillway.

EasyPro Res-Cubes feature:

• Reduce rock tonnage
• Reservoir can be made smaller because of the increased water percentage due to less rock being used
• Increase reservoir water capacity from 40%with rock to 90%+ with Res-Cubes
• Installation time is reduced considerably - smaller reservoir hole means less digging, less liner and less labor

High Strength Res-Cubes

• Use in high weight bearing features
• Ideal for use in Just-A-Falls and pondless features using large boulders
• Ships un-assembled to save space, quick and easy assembly on site
• Can be used under patios, pathways, sidewalks, etc.
• Great for retention and recycling of rain water
• HSC22 equals 2.4 cu. ft. of space
• HSC44 equals 4.4 cu. ft. of space

EasyPro Eco-Series Miniature Pump Vaults are:

• Roto-molded for excellent strength
• Can be used with JAFME extension
• Ideal for mag drive pumps
• Can be used in small Just-A-Falls or custom built fountain basins

EasyPro Pro-Series Pump Vaults are:

• Built heavy duty to withstand the pressure of being buried under rock
• The slots cut in the sides allow water into the pump
• Intake tubes available for JAFM and JAFV to increase flow capacity

EasyPro Pro-Series Pump Vault Extension:

• Allows you to dig your reservoir deeper (great for tight areas) and still have easy access to the pump
• Flange around bottom slides right over the top edge of the small vault
• Multiple extensions can be used if needed

EasyPro Pro-Series Intake Tubes:

• Increases flow capacity by an additional 2500-5000 GPM!
• Available for JAFM and JAFV to increase the max flow capacity

The Little Giant Waterfall Weir is designed to provide the look and function of a natural waterfall. As with all Little Giant products, it has a sturdy design which gives you the option to create a natural disguise with rocks or other decorative elements. It is designed to be simple to install and easy to clean, while creating an excellent point of origin for a disappearing waterfall. Multiple units can be run using a single pump to create an impressive waterfall display.

• Multiple plumbing ports for a more versatile installation
• Built-in drip edge that directs water flow and helps to prevent back flow
• Circular, ridged wall design which provides extra strength and helps keep unit anchored in the ground
• Includes flexible pipe grommets for easier installation

Extra strong grate available for the small, medium and large Aqua Falls

• Makes it very easy to cover the falls box with rocks and plants
• The small filter grate is an egg crate shaped material while the medium and large grates are an engineered structural plastic material

Looking to add a splash of water to your backyard or landscape? Look no further with the Aquascape WaterWall Spillway. The 16-inch WaterWall Spillway makes it simple to incorporate an impressive water feature spillway into almost any design.

Its stainless steel construction provides strength and corrosion resistance, ensuring years of trouble-free use. The clog-free, open top design will significantly reduce maintenance and its 1-inch plumbing is able to handle flow-rates up to 2,000 gallons per hour.

Combine with basin, pump, and plumbing for a complete feature. Installation of the WaterWall Spillway will enhance the beauty of any location, mask unpleasant noise pollution, and provide an oxygenated water source for birds and other wildlife.

All Atlantic Scuppers are constructed of 304 stainless steel. Copper finished scuppers have an additional antique copper plating over the stainless steel for a warm traditional look.

• 316 Stainless Steel Spillways enhance any vertical wall in the poolscapes, hardscapes and wherever chlorine is used as a disinfecting agent
• Modular design and convenient 4-inch height make Spillways ideal for garden wall block construction
• Readily adaptable to any vertical wall installation
• Built of heavy-gauge 316 stainless steel for durability you can count on under the harshest conditions
• Structural load bearing design allows for burial in masonry walls
• Non-clogging weir for open water basin installations and decreased maintenance