Diffused Aeration

Complete aeration packages for ponds and lakes up to 4 acres. For ponds and lakes to thrive, they need to breathe or problems can develop. The solution to organic sludge and excessive weed growth, low oxygen and stratification is aeration. These complete systems comes with everything you need to help improve the water quality and clarity of your pond or lake.

Matala Rocking Piston Compressor

• Includes manifold, oil filled pressure gauge and heat resistant hose.
• Oil-Less non-lube piston and cylinder
• Reliable, balanced for smooth and low vibration operation.

Weighted Air Hose

• Extreme weather resistance
• Smooth inside wall surface with low pressure drop and high energy efficiency
• Resistant to rips and tears - resilient against fishing hooks and and wildlife.

Matala Diffuser w/ Base

• Base keeps the air diffuser(s) up out of the mud.
• Hollow base that can be filled with sand or gravel
• Diffuser membrane is made of high quality EPDM

The Matala rocking piston compressor with heavy duty cabinet is ideal for ponds and lakes from 1/4 - 4 acres. The locking cabinet is landscape green color and designed for outdoor extreme weather conditions. The cabinet stands on a solid support base to maintain a level installation. Within the cabinet you'll find a cooling fan with cross flow ventilation. The compressor plugs into a built in outlet. All components are protected within. The heat protection hose leads externally and all you have to do is connect your air hose. Very simple to install and operate. The cabinet should be located above pond water level and flood zone and within 50 feet of the shore. Do not bury.

• Compressor with manifold system
• Full locking metal cabinet, landscape green color.
• Built in GFI outlet w/ 6 ft. power cord
• Cross flow ventilation fan.

Adding a sub-surface aeration system is the perfect way to increase your pond's or lake's water quality and oxygen levels while maintaining its natural appearance. Sub-surface aerators utilize diffuser modules that sit at the bottom of your pond and are connected by weighted tubing to an air compressor on shore. The compressor pumps much-needed air to the very bottom of the pond to de-stratify the water column and infuse oxygen into the water. The membrane on the diffuser breaks the air into tiny bubbles, which are released into the pond. As these bubbles rise to the surface, they carry the low-oxygen bottom water upwards, where it mixes with the oxygen-rich surface water. The constant mixing causes the water column to de-stratify, allowing harmful gases to be released into the atmosphere.

Designed for easy installation. They're great as pond de-icers too!

For ponds and lakes to thrive, they need to breathe or problems can develop. The solution to organic sludge and excessive weed growth, low oxgen and stratification is aeration. The keys to sizing are depth and shape. The deeper the lake, the more water a single large diffuser can circulate. The shallower the lake, the more complex its shape, the more small diffusers will be required. Atlantic Water Gardens Complete Shallow Water Aeration System with Two Diffusers is everything you need to aerate ponds and lakes up to 7’ feet deep and up to 1/2 acre in surface area, with matched components designed to work perfectly together! The complete systems come with shallow water diffusers, weighted tubing, and all necessary push lock quick release fittings for your installation.

• Includes Linear Piston Shallow Water Compressor, Tubing & Diffusers
• Heavy-duty double-walled Cabinets secure and protect components with providing noise insulation
• Cabinets have a reinforced lockable lid and sturdy hinges with vandal resistant screws for secure installation
• Integrated cooling fan keeps components from overheating
• Filtered intake protects the compressor from dust and debris

For ponds and lakes to thrive, they need to breathe or problems can develop. The solution to organic sludge and excessive weed growth, low oxygen and stratification is aeration. The keys to sizing are depth and shape. The deeper the lake, the more water a single large diffuser can circulate. The shallower the lake, the more complex its shape, the more small diffusers will be required. Atlantic Water Gardens Complete Deep Water Aeration System offer deep water aeration for ponds and lakes from 8' to 45' in depth and up to 4 surface acres in area. The complete system comes with deep water diffusers, weighted tubing, and all necessary push lock quick release fittings for your installation.

• Includes Rocking Piston Deep Water Compressor, Tubing & Diffuser(s)
• Pressure gauge and pressure relief valve monitor and protect compressor for enhanced reliability and longevity
• Heavy-duty double-walled Cabinets secure and protect components with providing noise insulation
• Cabinets have a reinforced lockable lid and sturdy hinges with vandal resistant screws for secure installation
• Integrated cooling fan keeps components from overheating
• Filtered intake protects the compressor from dust and debris

These highly efficient and effective diffused aeration systems are designed and sized to meet most typical lake and pond aeration applications and come complete with everything you need including all connectors and adapter fittings.

Options:

• Stratus SRC25 (1/4 HP) or SRC50 (1/2 HP) rocking piston compressor
• 100 - 300 ft. weighted airline
• Single or Double diffusers
• No cabinet, ground or post

MOVE & AERATE LARGE VOLUMES OF WATER

Robust-Aire systems are quiet, move the most water, and provide great aeration benefits for applications 8 ft. or deeper. By pumping compressed air from a shore-mounted compressor, air is pushed through self-weighted lines to a diffuser on the pond, lake or tank bottom. The diffuser then continuously releases micro-bubbles that rise to the surface carrying large volumes of water. This induces oxygen-transfer as well as beneficial water movement and mixing. Kasco’s Robust-Aire has been independently tested to be up to 44% more efficient than any other system, meaning you can use less energy, spend less money, and get better results.

• Packages include diffuser assembly, compressor, and compressor mounting option
• The stainless steel diffuser assembly includes built-in strain relief and lands right side up every time
• Large air filters allow for less frequent maintenance
• Visual maintenance indicators quickly alerts when air filters need attention
• Eliminates thermal and chemical stratification 
• No electricity in the water 
• Creates open water to prevent ice damage to docks and boats 

Multiple Mounting Options: Base Mount Cabinet, Post Mount Cabinet, or No Cabinet

Bottom aeration plays an important role in creating a healthy pond with clean and clear water. This low pressure, high-volume process infuses pond water with oxygen while providing constant water movement to prevent the buildup of algae and muck, reduces mosquitos, and creates a healthy habitat for fish and plant life. It also helps break up thermocline that can develop over time in a static pond. 

• Increases oxygen levels making it easier for fish to thrive in the hot summers
• Promotes growth of algae controlling beneficial bacteria
• Lowers levels of dissolved toxic gasses and ammonia
• Reduces sludge build up on the pond bottom
• Keeps the water moving and prevents thermal stratification

AERATION SYSTEM COMPONENTS

Air Compressor: The air compressor is the primary piece of the aeration system, it is the pump that produces the compressed air that is delivered to the bottom of the pond. Compressors should be housed in a compressor cabinet near a power source.

Weighted Tubing: Weighted tubing carries the air produced by the compressor down to the diffuser(s) at the bottom of the pond. The weight of the tubing keeps it at the bottom of the lake.

Diffuser(s): Depending on the size of the pond you can have one to multiple diffusers throughout the pond. Diffusers receive the air from the compressor and “diffuse” it into tiny bubbles that aerate the entire water column from the bottom to the surface. 

Air Compressor Enclosure (optional): Air compressor enclosures conceal and protect you air compressor. If air compressors get wet or too hot, they will quit working. Compressor cabinets not only protect your pump from the elements, they also contain an air manifold, cooling fan and connecting airlines.

(on compressor)

Complete aeration systems for ponds up to 1/4 acre depending on shape and depth of pond. These kits includes compressor, self weighted air diffuser and 50′ x 3/8″ weighted airline tubing and fittings for connections.

• Continuous duty diaphragm air compressor
• Weighted air diffuser
• 50′ x 3/8″ weighted airline tubing
• Fittings and stainless steel clamps included
• Weather protection for the compressor is required

Teich-Aire Rocking Piston Compressors are designed and built to meet the demands of continuous-duty, year-round, large aeration applications. Available in 1/4, 1/2, or 3/4 HP,  these oil-less piston compressors can be used to replace or upgrade the compressor in Kasco Robust-Aire Diffused Aeration Systems.

These compressors offer reliability and performance in applications such as ponds and lakes, water treatment systems, golf course ponds, fish farms, harsh industrial environments and many more.

• 40 PSI pressure relief valve
• Vibration mounts
• Intake air filter assembly
• Brass hose fitting
• 6 ft. power cord
• Thermal overload protection
• Ramped internal valve plate to allow for restart under load

These heavy-duty, rocking-piston compressors are designed for the demanding job of 24-hour operation. The oil-free design safely aerates ponds with no electricity in the water. Available in 115 or 230 volts. Lightweight, die-cast aluminum components, permanently lubricated bearings and easily replaceable piston seal.

• 1/4 HP - 1.7 amps for the 115 volt, 0.9 amps for the 230 volt. CFM of 2 at 10 foot depth.
• 1/2 & 3/4 HP - 3.6 amps for the 115 volt, 1.8 amps for the 230 volt. CFM of 4.3 at 10 foot depth.

Ideal aeration compressor for deeper ponds and lakes. Includes oil filled pressure gauge, pressure relief valve, heat-resistant tube and aluminum manifold with swivel union. 

• Oil-less non-lube piston and cylinder.
• Permanently lubricated bearings.
• Lightweight die-cast aluminum components.
• Cylinder hard coated for wear resistance.
• Balanced for smooth, low vibration operation.
• Max. pressure up to 50 psi. (Pressure relief valve functions at 40 psi)

The air compressor is the primary piece of an aeration system that delivers compressed air to the diffusers at the bottom of a pond. The air compressor is placed on shore. With additional tubing, it can be placed up to 300 feet away without having to increase air compressor size.

• Increases oxygen levels making it easier for fish to thrive
• Reduces sludge build up on the pond bottom
• Keeps the water moving and prevents thermal stratification

• 1/2 HP: 390 watts, 3.5 CFM at 5' depth, 9.75" x 8" x 6"
• 1 HP: 750 watts, 4.2 CFM at 10' depth, 10.5" x 9.5" x 6"

These small, continuous duty diaphragm compressors are surprisingly powerful and an affordable option for smaller aeration systems. Brass barbed adapters included on both models for easy connection to 3/8" tubing. 6 ft power cord on both models.

DC22: Draws only one amp electric but operates up to 12′ deep and produces 0.7 CFM air flow

DC12: Higher pressure allows for aeration up to 35′ deep. Open flow produces 1.1 CFM air flow.

(on compressor)

The EasyPro Stratus SRC series rocking piston compressors are specifically designed for the demanding job of 24 hour operation - ideal for pond and lake aeration. The oil-less design safely aerates ponds with no electricity in the water. The shore mounted compressor sends air through tubing to a bottom mounted diffuser for a safe, effective way to aerate ponds. Compressors are available in 115v or 230v.

• Inlet air filter, rubber feet and 5′ power cord included
• Oil-less operation
• Die-cast aluminum components for overall strength
• Hard coated cylinder for wear resistance
• Permanently lubricated bearings

(on compressor)

The EasyPro Stratus RV Series rotary vane compressors are specifically designed for the demanding job of 24 hour operation. They offer less depth capabilities than diaphragm or rocking piston compressors but produce considerably more air. These medium pressure, oil free compressors are excellent for pond and lake aeration and de-icing. Carbon vanes self adjust to maintain maximum efficiency and can be easily replaced when worn out. Available in 1/4, 3/4 and 1 HP, 115v and 230v.

• Quieter operation than similar compressors
• Thermal overload protection
• Low maintenance with easy to service vane and filters
• 18′ max operating depth
• 6′ power cord