EasyPro Diffused Aeration

These highly efficient and effective diffused aeration systems are designed and sized to meet most typical lake and pond aeration applications and come complete with everything you need including all connectors and adapter fittings.

Options:

• Stratus SRC25 (1/4 HP) or SRC50 (1/2 HP) rocking piston compressor
• 100 - 300 ft. weighted airline
• Single or Double diffusers
• No cabinet, ground or post

If looking for an energy efficient aeration kit for a shallow pond 7' deep or less, these linear powered aeration systems are a great choice! Choose from either single (PA6SWN) or double (PA8SWN) diffuser system. Single diffuser is ideal for round or regular shaped ponds up to 3/8 acre. Use the dual diffuser system for long and narrow or irregular shaped ponds up to 3/4 acre.

• Extremely energy efficient
• Very quiet operation
• Long lasting, oil free design
• Quick sink tubing for easy installation
• Weather resistant enclosures

Let mother nature aerate your pond. Powered entirely by wind, these aeration windmills create a healthy, oxygenated environment without using electricity - ideal for remote ponds. Designed to sit up to 1,000 feet from the water’s edge, these systems circulate oxygen throughout the entire pond, preventing stagnant water, foul odors, and helping to keep your pond or lake cleaner, clearer, and more inviting all year.

• Extremely stable, four leg design
• 6 ft. diameter head with 12 blades operates in wind as low as 5 MPH
• Ideal for aerating remote ponds with no electricity nearby

These small, continuous duty diaphragm compressors are surprisingly powerful and an affordable option for smaller aeration systems. Brass barbed adapters included on both models for easy connection to 3/8" tubing. 6 ft power cord on both models.

DC22: Draws only one amp electric but operates up to 12′ deep and produces 0.7 CFM air flow

DC12: Higher pressure allows for aeration up to 35′ deep. Open flow produces 1.1 CFM air flow.

(on compressor)

The EasyPro Stratus SRC series rocking piston compressors are specifically designed for the demanding job of 24 hour operation - ideal for pond and lake aeration. The oil-less design safely aerates ponds with no electricity in the water. The shore mounted compressor sends air through tubing to a bottom mounted diffuser for a safe, effective way to aerate ponds. Compressors are available in 115v or 230v.

• Inlet air filter, rubber feet and 5′ power cord included
• Oil-less operation
• Die-cast aluminum components for overall strength
• Hard coated cylinder for wear resistance
• Permanently lubricated bearings

(on compressor)

Complete aeration systems for ponds up to 1/4 acre depending on shape and depth of pond. These kits includes compressor, self weighted air diffuser and 50′ x 3/8″ weighted airline tubing and fittings for connections.

• Continuous duty diaphragm air compressor
• Weighted air diffuser
• 50′ x 3/8″ weighted airline tubing
• Fittings and stainless steel clamps included
• Weather protection for the compressor is required

(on compressor)

The EasyPro Stratus RV Series rotary vane compressors are specifically designed for the demanding job of 24 hour operation. They offer less depth capabilities than diaphragm or rocking piston compressors but produce considerably more air. These medium pressure, oil free compressors are excellent for pond and lake aeration and de-icing. Carbon vanes self adjust to maintain maximum efficiency and can be easily replaced when worn out. Available in 1/4, 3/4 and 1 HP, 115v and 230v.

• Quieter operation than similar compressors
• Thermal overload protection
• Low maintenance with easy to service vane and filters
• 18′ max operating depth
• 6′ power cord

Use when operating pond diffuser(s) from a single pump. Assemblies with multiple outlets include swivel union, pressure relief valve, and a valve for each diffuser connection, allowing you to tweak the amount of air going to each diffuser and making it easy to take any diffuser offline for maintenance without shutting down the rest of the system. The ERP1V includes a swivel union and pressure relief valve but does not include a valve for the diffuser. 

• Designed for use on 1/4" FPT outlet rocking piston compressors
• Pressure relief valve
• Nickel plated brass valves to control air flow
• 2 ft. "heater" hose to dissipate heat before air tubing connections
• 3/8" nylon barb fitting at end of outlet hose