All External Pumps

The compact model 750 Series delivers big flow for little power that's great for smaller and simpler ponds (3,000 gallons or less). These extremely durable external pond and waterfall pumps combine high efficiency, enclosed impellers and dry-run resistant seals with the latest in motor technology to provide many years of trouble free and low cost service. The motor is totally enclosed fan cooled for durability and 115V only. 

• Max Head 12'
• 2" Inlet/ 1.5" Discharge
• 8 ft power cord
• 1/8 HP

The model 1000 Series external pond and waterfall pump has set the standard by which all others are measured. This series is a perfect blend of medium pressure and ample flow for the majority of ponds. The motor is totally enclosed, fan-cooled for durability.

• 1.5" Inlet & Discharge
• 8 ft power cord

Introducing the new Sequence 4000 Series external pond and waterfall pump. The expansive design meets today’s increased market demand for performance on all levels. Get up to 8,220 GPH with the 8200SEQ22, and use only 450 watts! This expansive design will bring peak performance with incredible energy efficiency.

• 8 ft power cord
• 2" Inlet & Discharge
• 2" Half union fittings included

Primer Series external pond pumps integrate a basket type pre-filter and self-priming capabilities into one efficient package for trouble-free operation. The integrated strainer basket on all primer units helps protect the internal rotating parts of the pump from damage due to external debris being pulled into the pump. The high efficiency enclosed impellers ensure low cost, high flow performance for many years. 

• 2" Inlet & Discharge
• 8 ft power cord

The Power 4000 Series external pond and waterfall pump is built to support applications requiring flow rates above 8,000 GPH at high head pressures. Achieving over 13,000 GPH and a max of 80 ft of head. Inlet and discharge ports are both increased to 2” with an inner diameter connection of FNPT, and outer diameter buttress threads for union adaptors, field installations become less burdened.

• 2" Inlet & Discharge
• 220 Volt

For the truly power hungry, we offer the Sequence Power 1000 Series external pond and waterfall pump. These high speed pumps deliver big flow rates and loads of pressure. All Sequence power series pumps have high efficiency enclosed impellers, stainless steel mechanical seals and premium efficient motors. 

• 1-1/2" Inlet & Discharge
• 220 Volt

The Sequence Titan series external pond and waterfall pump is sure to cover most large scale water feature requirements. The highest efficiency pumps available for water garden applications – where you need them most, in high flow! With flow rates between 12,500 and 18,400 GPH and head capabilities between 21 and 45 feet, the Sequence Titan series is sure to cover most large-scale water feature requirements. 

• Made in the USA
• 3" Inlet/ 2" Discharge

The compact ValuFlo 750 series external pond pumps deliver high water flows for little power. It is the ideal pump for smaller and simpler ponds with 3,000 gallons or less, with waterfalls and water features. The motor is totally-enclosed and fan-cooled for durability.

• 115V only.
• 8-foot cordset
• Made in USA
• 1/8 HP
• 2" Inlet/ 1-1/2" Outlet

The ValuFlo 1000 Series is a medium pressure external pond pump with ample flow that's the perfect blend for most ponds, water features and waterfalls. The motor is totally-enclosed, and fan-cooled for durability.

• Standard 115V
• 8-foot cordset
• Made in USA
• 1 1/2" Inlet/Outlet

PerformancePro Cascade Low RPM is a high efficiency, industrial grade external pond pump. Ideal for your pond, water feature, waterfall or general transfer and recirculation needs. Cascade pumps produce excellent flow rates at sufficient pressure (head) to really get the job done. The industrial grade polypropylene housings are built for long term use. A strainer pot may be attached to facilitate priming in a suction lift application and to strain debris from the inflow. 

PerformancePro Cascade Low RPM Pumps Feature:

• All 1725 RPM units are totally enclosed for excellent protection and long term reliability
• Money saving high efficiency
• Long life, corrosion resistant, 316 Stainless Steel shaft seals
• Impeller interchangeability allows you to easily change your pumps performance
• Quiet operation on both ends of the motor
• 115V, 10 TEFC Motor
• 1-1/2" FNPT Suction & Discharge ports

Power cord included on all models.

PerformancePro Cascade High RPM is a high efficiency, industrial grade external pond pump. Ideal for your pond, water feature, waterfall or general transfer and recirculation needs. Cascade pumps produce excellent flow rates at very high heads to really get the job done. The industrial grade polypropylene housings are built for long term use. A strainer pot may be attached to facilitate priming in a suction lift application and to strain debris from the inflow. 

PerformancePro Cascade High RPM Pumps Feature:

• 3450 RPM Motor
  
• Money saving high efficiency
• Long life, corrosion resistant, 316 Stainless Steel shaft seals
• Impeller interchangeability allows you to easily change your pumps performance
• Quiet operation on both ends of the motor
• 10 ODP Motor
  
• 1-1/2" Suction & Discharge ports

Power cord included on 1/3 - 1 HP models. 1-1/2 - 2 HP models do NOT include power cord. 

Artesian2 Low RPM is the perfect choice external pond pump for high efficiency and reliability combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene. Artesian2 pumps are ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pots large basket. Available in 1/8 to 1/2 hp at 1725 rpm.

PerformancePro Artesian2 Low RPM Pumps Feature:

• All 1725 RPM units are totally enclosed and fan cooled for extended service life
• Money saving high efficiency pump and motor units
• 2 inch unions are included
• Long life corrosion resistant Stainless Steel shaft seals
• Impeller interchangeability allows you to easily change your pumps performance
• 115V, 10 TEFC Motor
• Quiet Operation

Power cord included on all models.

Artesian2 High Flow is the perfect choice external pond pump for high flow waterfalls - efficiency and reliability combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene. Artesian2 pumps are ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pots large basket. Available in 3/4 to 3 hp at 3450 rpm.

PerformancePro Artesian2 High Flow Pumps Feature:

• 3450 RPM Motor
• Money saving high efficiency pump and motor units
• 2 inch unions are included
• Long life corrosion resistant Stainless Steel shaft seals
• Impeller interchangeability allows you to easily change your pump™s performance
• 1/2 - 1-1/2 HP Models have 115/230V
• 2 & 3 HP Models have 230V
• 10 ODP Motor
• Quiet Operation

Power cord included on 1/2 - 1 HP models. 1-1/2 - 3 HP models do NOT include power cord. 

Artesian2 High Head is the perfect choice external pond pump for your higher flow applications at high heads, ideal for large volume waterfalls - high efficiency and reliability combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene. Artesian2 pumps are ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pots large basket. Available in 1/2 to 3 hp at 3450 rpm.

PerformancePro Artesian2 High Head Pumps Feature:

• 3450 RPM Motor
• Money saving high efficiency pump and motor units
• 2 inch unions are included
• Long life corrosion resistant Stainless Steel shaft seals
• Impeller interchangeability allows you to easily change your pumps performance
• 1/2 - 1-1/2 HP Models have 115/230V
• 2 & 3 HP Models have 230V
• 10 ODP Motor
• Quiet Operation

ArtesianPro Low RPM is the external pond pump you need for your higher flow applications with superior energy savings. An always reliable choice to power external filters and waterfalls. It not only delivers great flow rates at usable heads, but it does so efficiently! You get the safety and convenience of self-priming along with great energy savings. For ease of use, it provides a large strainer basket, and an easy open Lexan lid. The specially designed lid and clamp ring ensure a positive seal with very little o-ring wear.

PerformancePro ArtesianPro Low RPM Pumps Feature:

• All 1725 RPM units are totally enclosed and fan cooled for extended service life
• Money saving high efficiency pump and motor units
• 3" suction and discharge ports with quick connect fittings included. 2" or 3" fittings available.
  
• Long life corrosion resistant Stainless Steel shaft seals
• Impeller interchangeability allows you to easily change your pumps performance
• 115V, 10 TEFC Motor
• Quiet Operation

ArtesianPro High Flow is the external pond pump you need for your higher flow applications. It not only delivers great flow rates at useable heads, but it does so efficiently! You get the safety and convenience of self-priming along with great energy savings. For ease of use, it provides a large strainer basket, and an easy open Lexan lid. The specially designed lid and clamp ring insure a positive seal with very little o-ring wear.

PerformancePro ArtesianPro High Flow Pumps Feature:

• 3450 RPM Motor
• Money saving high efficiency pump and motor units
• 3" suction and discharge ports with quick connect fittings included. 2" or 3" fittings available.
  
• Long life corrosion resistant Stainless Steel shaft seals
  
• Impeller interchangeability allows you to easily change your pumps performance
• 1/2 - 1 HP Models have 115/230V
• 1-1/2 - 5 HP Models have 230V
• 10 ODP Motor
• Quiet Operation

ArtesianPro High Head is the pump you need for your higher flow applications at high heads. Perfect for waterfalls that require massive flow rates at high heads. It not only delivers great flow rates at useable heads, but it does so efficiently! You get the safety and convenience of self-priming along with great energy savings. For ease of use, it provides a large strainer basket, and an easy open Lexan lid. The specially designed lid and clamp ring insure a positive seal with very little o-ring wear.

PerformancePro ArtesianPro High Head Pumps Feature:

• 3450 RPM Motor
  
• Money saving high efficiency pump and motor units
• 3" suction and discharge ports with quick connect fittings included. 2" or 3" fittings available.
  
• Long life corrosion resistant Stainless Steel shaft seals
  
• Impeller interchangeability allows you to easily change your pumps performance
  
• 1 HP Model has 115/230V
  
• 1-1/2 - 5 HP Models have 230V
  
• 10 ODP Motor
  
• Quiet Operation

PerformancePro Pumps provides two brands of external variable speed pond pumps known as Dial A Flows (DAF models). All DAF models incorporate a slow speed increase (slow spool up) so that there is no sudden pressure or flow hazard for fish. The two brands now available are the Neptune, manufactured by US Motors, or the V-Green, manufactured by Century. Both brands are available in 1.6HP and 2.7HP. Model numbers including “N” use the Neptune/US Motors. Model numbers including “R” use the V-Green/Century motor. These pumps are molded of corrosion-resistant polypropylene, and an easy-open transparent lid provides easy access to the integrated strainer basket.

• Low energy consumption, high efficiency pump and motor.
• Three phase motor offers premium efficiency with totally enclosed fan cooled protection for maximum protection and reliability.
• Option available to control speed remotely (accessories required)
• You can control the speed remotely (accessories required).
• 2 inch unions included

PerformancePro Pumps provides two brands of external variable speed pond pumps known as Dial A Flows (DAF models). All DAF models incorporate a slow speed increase (slow spool up) so that there is no sudden pressure or flow hazard for fish. The two brands now available are the Neptune, manufactured by US Motors, or the V-Green, manufactured by Century. Both brands are available in 1.6HP and 2.7HP. Model numbers including “N” use the Neptune/US Motors. Model numbers including “R” use the V-Green/Century motor. These pumps are molded of corrosion-resistant polypropylene, and an easy-open transparent lid provides easy access to the integrated strainer basket.

• Low energy consumption, high efficiency pump and motor.
• Three phase motor offers premium efficiency with totally enclosed fan cooled protection for maximum protection and reliability.
• Option available to control speed remotely (accessories required)
• You can control the speed remotely (accessories required).
• 3” ports with options of 2” or 3” fittings

We offer a few different options of strainer baskets. A strainer basket/priming pot is recommended for all applications. All units come complete with an internal strainer assembly and gasket seals.

• Our 6" diameter, 90 cubic inch, strainer baskets are sold with either a 1.5" or 2"union adapter.
• Our 10" diameter, 500 cubic inch. strainer baskets comes complete with both a 1.5" and 2" adapter

• Protects motor from water damage
• Reduces noise level
• Easy assembly, no tools required
• Pre-cut knock out sections for easy customization
• Constructed of UV resistant, durable thermoplastic, providing long lasting protection from the elements.

ProTect fits Artesian2 and Cascade Models.

Fits ArtesianPro motor only.

*Pump NOT included*

E. SWIM is the new electronic swimming pool pump with high energy efficiency made by DAB. Designed for water circulation and filtration in residential and civil swimming pools, but also suitable for specific applications requiring the handling of aggressive liquids like fish farming, agriculture, and industry.

• High efficiency brushless motor
• 8 programmable setttings
• Variable speed or variable flow function mode
• User friendly interface with LCD display for programing and monitoring
• Whisper quiet

The Anjon Landshark High Efficiency External Water Pump is a self-priming heavy-duty external water pump that delivers outstanding reliability and performance. This unit is equipped with a low maintenance, self-lubricating direct drive motor. The hydraulically self-balancing impeller provides vibration free operation.The built-in removable over-sized debris basket traps twigs and leaves. Inspection and clean-out is easy thanks to clear, quick release cover. Built to last with high quality seals and bearings for long efficient motor life. Thermal sensor keeps pump from overheating.

• This self-priming heavy-duty external water pump delivers outstanding reliability and performance.
• Low maintenance, vibration free operation. Self-priming pump. Hydraulically self-balancing impeller. Self-lubricating direct drive motor.
• Debris? Clog-free! Built-in removable over-sized debris basket traps twigs and leaves. Inspect and clean easily thanks to clear, quick release cover.
• Built to last. High quality seals and bearings for long efficient motor life. Thermal sensor keeps pump from overheating.

Aquascape EXT Pond Pumps are the ideal external pond pumps for water feature applications requiring high flow with high efficiency in a non-submersible style pump. The high flow rates of the EXT pumps make them perfect for supplying water to large waterfalls, wetland filters and water jets. The oil-free, low RPM, fan-cooled motor provides quiet operation and a long life. Semi-closed vane impeller provides efficient flow and can pass solids up to 3/4". Available in four different models - two single-phase motors and two 3-phase motors ranging in max flow rates from 12,500 - 18,400 GPH. The EXT Pump Plumbing Kit (Item #48027) provides all of the necessary fittings and valves to make the EXT pump easy to install, prime and operate. 

• Oil-free motor provides quiet operation
• Totally enclosed fan-cooled motor
• 3" inlet, 4-bolt flanged
• 2" discharge, 4-bolt flanged

If you're looking for a great quality external self-priming pond pump at an affordable price point, look no further! Perfect for ponds, waterfalls, filters and other water features. These high performance, medium head external pumps come complete made of 100% recyclable plastic. Noncorrosive, chemical/UV resistant, and can withstand temperatures of up to 150° F. Suction and discharge ports are equipped with 1-1/2" FPT unions. Priming pot has a specially constructed clear lid with ring lock design making it super easy to open. Every pump is performance tested before leaving the factory.

• Continuous duty 115 volt motor
• Self-priming
• 1-1/2" FPT half unions
• Includes strainer basket with clear lid for easy inspection
• 6′ power cord