All Algae Control

Compare to AlgaeFix, same active ingredient and 20% more concentrated.

Algaecide For Ponds - Stops Algae Growth & Controls string algae!

No more green water with ALGAWAY 5.4 Algaecide!

It stops algae growth in ponds and can be applied to areas that contain fish and plants!

For use in self-contained ornamental ponds and fountains without any outflow. For small ponds with heavy algae growth, clean the excess algae off the sides and ornaments before adding ALGAWAY 5.4 . This will reduce the amount of decaying organic matter.

Fountains, Small Ponds with goldfish and koi - Treat only those fountains and ponds which will have no outflow after treatment. High water temperatures cause more rapid natural decay of dead algae which can cause fish distress. If animals are present clean out excess algae as stated above or use before temperature exceeds 75°F (24°C).

CAUTIONS: In ponds, insure that water is well aerated via waterfall, fountain or other method to prevent fish loss. Aeration must be continuous. Not safe for use with snails, shrimp and other crustaceans or mollusks.

Repeat dosage once per week.

Microbe-Lift Algaway Application Rates
Volume of water to treat (gallons)	Dosage
360 gallons	1 oz

Aquascape Algaecide is a liquid pond algae control product that quickly and efficiently combats algae and stops algae growth in ponds, waterfalls, and fountains. Algaecide keeps water clear and greatly reduces pond and fountain maintenance. Aquascape Algaecide controls string algae growth as well as single-celled floating algae, also known as green water. Elimination of algae will allow you to spend more time enjoying your pond and less time maintaining it. A teaspoon will treat 50 gallons, making the addition of treatment quick, easy, and precise. 

• Stops algae growth
• Eliminates green water
• Fast Acting and Easy to use
• Can be used in ponds and fountains with fish and plants

Volume of Water to Treat (Gallons)	Unit of Measure
10	1 ml 1/5 tsp
50	5 ml 1 tsp
100	10 ml 2 tsp
300	30 ml 2 tbsp

Effectively controls many types of green or green water algae, string or hair algae and blanket weed in ponds that contain live plants. Controls existing algae and helps resolve additional algae blooms. Keeps ornamental ponds and water gardens clean & clear. Can be used in ponds with plants!

This product works very well and doesn't harm your aquatic plants or fish when used according to label instructions. Ensure that water is well aerated via waterfall, fountain or other method to prevent fish loss. Aeration must be continuous. Not safe for use with snails, shrimp and other crustaceans or mollusks.

API Pond AlgaeFix Application Rates
Add one dose every three days until algae is under control (usually 3-4 doses) and then once per week to prevent the return of algae.
Add 1 tsp per 50 gallons	Add 1/4 cup per 600 gallons
Add in an area of high water circulation & aeration
AlgaeFix can be mixed in a bucket of pond water & dispersed around pond

Fast acting algae control. GreenCleanFX Liquid Algaecide is a highly effective and affordable solution to algae problems that plague a wide variety of backyard water features, including ornamental ponds, pondless waterfalls, and fountains. As an EPA-registered algaecide, it is compliant with the USDA National Organic Program regulations, making it safe for use in water features containing fish, plants, and other aquatic life.

• Breaks down into water and oxygen, leaving no residuals
• Prevention and control of string algae and single-cell algae (Pea Soup)
• Reduces organic build-up and odors 
• Fish, pet and family friendly when used as directed
  

Treatment	Per 50 gal.	Per 500 gal.
Curative	2 tsp.	3.4 ounces

1. Apply early in the morning under sunny, calm conditions.
2. Measure the pH of water before treatment. If pH is below 7.0, adjust the water pH to between 7.0 and 8.0.
3. Distribute recommended dose as evenly as possible to several areas around the pond so product evenly disperses. It may also be mixed in a bucket of pond water and evenly distributed around the pond.
4. Do not shut off pump(s) or aeration device(s); aeration must be continuous during treatment for 48 hours.
5. Repeat dose every 3 days until algae is under control.

Removing excessive algae growth will reduce the amount of decaying organic matter in the pond.

Quickly remove green algae in pond water with Tetra Algae Control. Effective at combating algae blooms (green water), string & hair algae (Spirogyra) and blanket weed (Oedogonium). Safe for ornamental plants and fish, when used as directed.

Tetra Algae Control Application Rates
10mL	1/4 cup
for every 120 gallons of pond water	for every 720 gallons of pond water
Dilute the proper dosage in a bucket of water and pour into the treatment area. Treatment may be repeated if needed every three days up to three total doses.
Do not use in ponds established less than 3 months

Chemical Algae Eliminator Formulated for Decorative Ponds & Fountains, Irrigation Ponds, Water Hazards & Retention Ponds

• Eliminates most planktonic and filamentous algae quickly and efficiently and there's no phytotoxicity so water is safe for irrigation, turf and shrubs
• Highly concentrated (60% active ingredient) E.P.A. registered algaecide
• Keeps pond water clean and algae free
• Eliminates plugging of irrigation lines and pumps

Do NOT use with fish

Not for sale, use or distribution in New York or California

E.P.A. Registration Number 1448-114-74466

Alternative Approach to Harsh Chemicals

Microbial Algae Clean is an alternative, all-natural approach to algae control as the first bacterial algaecide registered with the Environmental Protection Agency. This product contains patented bacteria to control green water algae in ponds with live fish and plants, and helps establish and maintain a clean, odor-free and algae-free pond. Microbial Algae Clean promotes a cleaner pond environment by eliminating organic sludge and debris, and will not harm live plants or fish.

• Contains patented bacteria
• Biological inhibitor of green water
• Eliminates troublesome organic sludge and debris
• Helps establish and maintain the biological filter
• Reduces noxious odors from the pond

API Pond Microbial Algae Clean Application Rates
Add one dose twice a week for the first two weeks, then once a week to maintain control of green water algae.
Add 1 tsp per 50 gallons	Add 1/4 cup per 600 gallons
Do not apply directly to water other than that in your synthetically lined ornamental pond.

Through the power of oxidation, GreenClean Granular Algaecide breaks down algae cells on contact!

Its unique, organic chemistry immediately begins fighting algae blooms and releasing vital oxygen into the water as it biodegrades. This solution can be used as a curative or preventative treatment in any water feature. Formulated without the use of harsh chemicals or chlorine, you will be worry free because nothing negative can effect your aquatic ecosystem. Trust GreenClean to immediately kill algae in any water feature around your home including ponds containing fish, plants, and aquatic life. GreenClean is an EPA registered, organic algaecide, so you can feel good about what is in your water.

• Controls string algae in ponds, waterfalls, streams, and rocks
• Safe for use around pets, birds, fish, and aquatic plants
• Copper alternative
• Works on contact

How Does GreenClean Granular Work? GreenClean is a granular algaecide with an activated peroxygen chemistry that works through a powerful oxidation reaction to break down algae cells on contact. An added benefit, the process releases oxygen into the water as it works to eliminate algae.

I Have Fish In My Pond: Can I Use GreenClean? GreenClean will not harm fish or aquatic life. GreenClean once diluted in water is non-harmful to animals such as birds, bees, and pets.

Can I Use GreenClean On My Waterfall? Yes, as a contact algaecide the granules need to make contact with the algae to be effective. Our recommendation for treating waterfalls is to turn the pumps off, apply GreenClean directly to the algae, and then turn them back on after 20 minutes.

Will GreenClean Affect The pH Level? GreenClean will raise the pH up to 1 unit. Although this will comeback down on its own within about a week. Test pH prior to using and apply in the morning. 

Note: This Product is Toxic to Birds in Raw Form

GreenClean Application Rates
Pond Size	High Curative Rate (Green Water Algae)	Low Curative Rate (Green Water Algae)	String Algae
50 gallons	1 tbs	.5 tsp	1 tbs
100 gallons	1.5 tbs	1 tsp	1.5 tbs
500 gallons	.5 cup	1.5 tbs	.5 cup
1,000 gallons	1 cup	3 tbs	1 cup
5,000 gallons	5 cups	1 cup	5 cups
10,000 gallons	10 cups	2 cups	10 cups

Aquascape EcoBlast Contact Granular Algaecide eliminates unsightly algae and debris from waterfalls, fountains, streams, and rocks on contact. Simply sprinkle the treatment directly on the affected area and watch the algae disappear. Quickly removing this algae growth will allow you to spend more time enjoying your water feature and less time maintaining it. EcoBlast Contact Granular Algaecide is able to be used at any water temperature, making it an excellent choice for any time of year. The treatment can also be used with a wide range of pH levels.

• Eliminates algae on contact
• Fast acting spot treatment
• Can be used at any water temperature
• Ideal for waterfalls and streams

Contractor Grade Water Treatment - 25% more concentrated. 

Spot-treat the trouble areas of your waterfall, stream, and rocks on contact. Professional formula quickly dissolves debris from waterfalls and rocks. 

• Quickly dissolves debris from waterfalls and rocks.
• Reduces pond maintenance.
• Goes to work instantly treats up to 3,650 sq. feet.

Sq. Feet	Light Debris	Heavy Debris
25-50 sq.ft	¼ cup	½ cup
51-100 sq.ft	½ cup	1 cup
101-150 sq.ft	¾ cup	1½ cup
151-200 sq.ft	1 cup	2 cups
200-250 sq.ft	1½ cup	3 cups

Break Down Unsightly Debris! Microbe-Lift Oxy Pond Cleaner will safely yet immediately breakdown accumulated debris from rocks, streams and on waterfalls. Microbe-Lift OPC, Oxy Pond Cleaner will safely spot-treat all areas of light-to-heavy accumulations of debris on rocks, waterfalls, streams, planters, etc. Microbe-Lift Oxy Pond Cleaner is 100% safe when used as directed.

• Uses Oxygen Power to break down unsightly debris
• Especially helpful on streams and waterfalls
• Deep cleans planters and rocks
• Helps to prevent pond odors
• Oxidizes and Detoxifies

Directions: Microbe-Lift OPC, Oxy Pond Cleaner is not temperature sensitive but works best in warmer weather. To achieve the best results, manually clean out as much accumulated debris from the pond as possible and shut down waterfalls before cleaning. Do not dilute. To treat areas with debris build up, sprinkle over areas needing treatment. Make direct contact but avoid live plants where possible. To maintain a continued proper ecosystem in your pond, always add Microbe-Lift PL, or any bacterial/enzymatic treatment, 48 hours after using Microbe-Lift Oxy Pond Cleaner.

Before Use: Use Microbe-Lift Ammonia Test Strips to test for the presence of ammonia in your pond water. If ammonia levels are above 0.8mg/L, DO NOT apply Microbe-Lift OPC, Oxy Pond Cleaner until the ammonia level is brought down below 0.8mg/L. If ammonia levels exceed 1.0mg/L, add Microbe-Lift Ammonia Remover.

After Use: Ammonia levels should be monitored for two days following applications of ANY/ALL oxygen release compounds as they can kill beneficial bacteria in a pond/lake resulting in an ammonia or nitrite spike. Use Microbe-Lift Ammonia Test Strips to test for the presence of ammonia. If your ammonia levels exceed 1.0mg/L., add Microbe-Lift Ammonia Remover to reduce the ammonia level to 0.8mg/L or below.

Microbe-Lift Oxy Pond Cleaner Application Rates
Pond Size (gallons)	Weekly Maintenance (No Existing Debris)	Light Debris Accumulation	Heavy Debris Accumulation
80 - 200	.75 oz.	1 oz.	1.5 oz.
201 - 500	1.5 oz.	2 oz.	3 oz.
501 - 1,000	4 oz.	6 oz.	8 oz.
1,001 - 1,500	6 oz.	8 oz.	12 oz.
1,501 - 2,500	8 oz.	12 oz.	16 oz.
Large Ponds & Lakes
Apply around perimeter of pond/lake as much as needed
Pond Cleaning/Non-Painted Surfaces
96 oz. per 1,000 sq. ft. of surface area to be cleaned

UltraClear Oxy is an effective oxygen-based solution for cleaning rocks, waterfalls, fountains, statues, plant pots and ponds in general. Contains sodium percarbonate and sodium carbonate for powerful oxygen based cleaning of rocks and crevices in waterfalls as well as stains on rocks, fountains, statues and other stone surfaces.

Spot Treating : Apply a light layer of powder to problem areas

Shut off waterfall. Manually remove any obvious debris or material for rocks and waterfall. Sprinkle UltraClear Oxy cleaner directly over areas that need to be cleaned. Do not apply directly to live plants. Treat pond with UltraClear Clarifier 24 hours after using Oxy cleaner to ensure proper biological balance in pond.

EcoKlean quickly and safely removes attached organics and algae stains from rocks, waterfalls, streambeds and anywhere else build-up occurs. Fast dissolving granules add oxygen to the pond, remove odors and when used regularly, can actually eliminate the need for disruptive, expensive complete pond clean-outs.

• Removes algae stains and debris from waterfalls, streams and rocks
• Lifts debris to the surface with the power of pure oxygen
• Works on contact to keep hard surfaces

Pond & Waterfall Cleaner uses the power of active oxygen to deep-clean pond surfaces, waterfalls, fountains, and bird baths on contact. It is safe for all fish and aquatic plants, and should be used as needed to maintain a clean, clear pond or outdoor water feature.

Deep cleans waterfalls and decorative rocks

Keeps fountains and birdbaths clean

Safe for all fish and aquatic plants

Part of your water problem solving solution

Scoop included for easy granular powder application

Helps Control Algae Growth in Ornamental Fish Ponds Without Plants

Offers an easy, effective way to control and prevent the growth of algae. Leaves pond water crystal clear. Helps keep pond clear from algae when used regularly. Pond block is not recommended for ponds with plants.

Details:

For best results, place the block in an area of the pond that is calm.

Tetra Pond Block Application Rates
Pond Size (gallons) 100 - 250 gallons	Dose - 1 block
For regular maintenance, replace block when fully dissolved (usually about 30 days)
Initial dose may require one block for each 100 gallons

Ecological Laboratories has teamed with GreenClean® to give you the Mean Green Algae Team

2 great products in 1 handy carrying case

Get tough on algae with Ecological Laboratories' Mean Green Algae Team two-step program, comprised of our MICROBE-LIFT/PL"the #1 selling bacterial pond additive on the market"with GreenClean®, an EPA Registered granular algaecide!

GreenClean is great for killing the algae. Apply it and watch most filamentous or string algae die before your eyes! Three days after its usage, apply MICROBE-LIFT/PL to make the dead algae completely disappear by degrading it to carbon dioxide and water! In addition, MICROBE-LIFT/PL will seed your filter; help break down other organic sediments on the bottom of your pond; keep the water crystal clear; and help establish and maintain efficient nitrification.

GreenClean can cause an increase in salinity or rise in pH, so be sure to test your pond water especially if you have ammonia levels above 0.8 mg. L.

GreenClean EPA Registration Number 70299-4

Landscapers & Pond Professionals please see below for the Professional Mean Green Algae Team designed especially for you.

Microbe Lift Mean Green Algae Team Application Rates
Pond Size	High Curative Rate	Low Curative Rate
50 gallons	1 tbs	.5 tbs
100 gallons	1.5 tbs	1 tbs
500 gallons	.5 cup	1.5 tbs
1,000 gallons	1 cup	3 tbs
5,000 gallons	5 cups	1 cup
10,000 gallons	10 cups	2 cups