Location
Home / Brands / Pond Armor Epoxy Waterproof Pond Sealant

Pond Armor Epoxy Waterproof Pond Sealant

Designed to waterproof even the toughest water feature projects. Just 3 simple steps: Prepare the pond, apply the coating, enjoy the pond!

Pond Armor Epoxy Waterproof Pond Sealant

Just 3 simple steps: Prepare the pond, apply the coating, enjoy the pond!

Pond Shield is a non-toxic epoxy coating designed to waterproof even the toughest water feature projects - ponds, fountains, waterfalls, pools, and more! Made from space age polymers that are designed to provide long life and excellent wear resistance. Colors shown are approximate and may not reflect shade precisely.

  • Safe for fish and plants
  • Easy application - can be applied just like paint
  • Bonds to almost any surface
  • Safe in chlorinated and salt environments
  • 1.5 Quart Kit - Coverage up to 60 sq ft at 10 mil thick
  • 1.5 Gallon Kit - Coverage up to 240 sq ft at 10 mil thick
  • 3 Gallon Kit - Coverage up to 480 sq ft at 10 mil thick
Pond Armor Pond Shield Epoxy Waterproof Pond Sealant

Pond Armor Pond Shield Epoxy Waterproof Pond Sealant

  Icons SKU
Pond Armor

A safer alternative to using muriatic acid, it is designed to clean calcium deposits out of the surface pores of concrete and other concrete types of substrates. It can also be used to clean a variety of other surfaces such as metals and painted surfaces (test on a small surface before committing to full use). This technology is formulated to dissolve carbonates which hold scale and other deposits together in mass. After the carbonates are cleaned and dissolved, the sulfates such as iron, calcium, (lime), magnesium and other insoluble materials fall from the surface when rinsed away.

It is a safe replacement for other types of acid such as muriatic, phosphoric, citric and others. It uses a low pH organic salt to replace traditional mineral and organic acids. It is safe on metals such as aluminum, copper, and stainless steel. It clings to vertical surfaces. It is bio-degradable and phosphate free and classified as a low-irritation to skin. The formula is low V.O.C. and complies to California Air Resource Board (C.A.R.B.) Cleaning Standards.

  • Works on concrete, cement, stone, mortar, brick, stucco, block and grout
  • Use without diluting. Can be poured on or sprayed on with a spray bottle.
  • Safe for metals such as aluminum, copper, and stainless steel
  • Use without diluting. Can be poured on or sprayed on with a spray bottle.
Pond Armor Surface Prep - Etching Solution 1 Gal

Pond Armor Surface Prep - Etching Solution 1 Gal

  SKU
SP-GA

Crack RX is a light gray polyurethane caulk used to seal and close small gaps and cracks in the substrate prior to applying Pond Shield nontoxic epoxy. Applied with a simple caulk gun, Crack RX is capable of bridging even large cracks. It dries fast and once cured, it can be sanded and painted over. Will bond to porous and nonporous surfaces and is completely cured within 24 hours. Has excellent tear and general abrasion resistance as well.

  • Fills small pits and voids
  • Dries quickly
  • Can be used with Pond Shield non-toxic epoxy in a variety of water feature types such as ponds, pools, stock tanks, fountains, streams, waterfalls, mini lakes, aquariums, aquaponics systems, hydroponics systems and many more
  • Adheres to many surfaces like concrete, brick, block, stone, wood, fiberglass, most metals and most plastics
  • Excellent tear and abrasion resistance
  • Can be sanded and painted over
  • Can be used to bridge materials of different types
  • Superior bonding to non porous surfaces
  • Made in the U.S.A.
Pond Shield Crack RX

Pond Shield Crack RX

  SKU
CRX-10OZ

Pond Shield primer is a bright white acrylic polyurethane base that can be used on a variety of surface types such as wood, concrete, brick, block, steel and other metals, and many more. Its primary function is to aid in filling small pit holes and such in rough surfaces like concrete. In doing so, this can eliminate many types of problems that occur with certain substrates such as outgassing (where unwanted bubbles for in the finished coating). Pond Shield Primer will displace the air in these tiny holes making it easier for you to apply Pond Shield nontoxic epoxy. Being bright white in color, Pond Shield Primer also allows you to even out the color of the substrate you plan to coat with Pond Shield nontoxic epoxy. 

  • Fills small pits and voids, dries quickly
  • Provides a base to even up surface uneven surface coloring
  • Can be used with Pond Shield non-toxic epoxy in a variety of water feature types
  • Adheres to many surfaces like concrete, brick, block, stone, wood, fiberglass, most metals and most plastics
  • Quart covers 100 sq ft. 
  • Gallon covers 400 sq ft.
Pond Shield Primer

Pond Shield Primer

  SKU Sizes
PRIME-QT
Quart & Gallon
Universal Pond Supply
Quick Store Search
© 2024 Universal Pond Supply, all rights reserved worldwide.
Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. - https://kryptronic.com/ [0.050022 / 3.703232]