All Spillways and Weirs

Easily add a waterfall or stream to a new or existing water feature. Because of their rugged design and HMWPE construction, Fastfalls also comes with Atlantic's exclusive lifetime warranty.

Each FastFalls includes bulkhead, liner attachment flange, splash reduction foam and top grate.

Incredibly strong one-piece units feature an internal baffling system, support cones and re-enforced spillway. The innovative "inside the liner" design and rear liner attachment simplifies installation. Cover with rock, gravel, soil or mulch to blend with your surrounding landscape.

• Spillway boxes diffuse incoming water flow to create starting points to streams and waterfalls
• Designed to make plumbing the top of the waterfall as easy as possible
• Innovative rear liner attachment simplifies installation and eliminates leakage due to settling
• Crush-proof design with internal baffles stabilized by support cones carries the weight of stone
• Reinforced spillway lip retains rock, gravel, mulch or soil
• Includes installation kit, male thread adapter and one-piece liner flange

Faster to install and Tougher spillway than any other spillway on the market

• Ideal for use at beginning of streams and in block walls, pools and formal fountains
• Low profile design of only 3-1/2"
• Extra strong vertical rib design creates a nearly indestructible diffuser
• Dual 2" inlets

Creates 16" Wide Waterfall

Enjoy hours of relaxation as your pond recreates the beauty of nature.

• No glue liner connection - all compression seal securely holds liner in place without adhesives.
• Easily connect 2" flexible or rigid PVC tubing to the rear inlet (not shown). Adapts to other types and sizes of tubing with fittings sold separately.
• Bio-mechanical filtration.
• Super strong injection molded housing.
• Use multiple units for a wider waterfall.
• Rated for pump flow rates of 900-3000 gph

Atlantic's NEW Stainless Steel Scuppers bring a gleaming new dimension to our spillway line. Constructed of durable 304 stainless steel and available in the same sizes as our popular Colorfalls, these sleek modern Scuppers put a sharp, fresh shine on your formal water feature project.

• Fully welded enclosure
• 304 Stainless steel

Colorfalls is a lighted weir specifically designed for water features. Fits perfectly in formal retaining walls and pond-free applications. A breathtaking new dimension to a water feature.

• 1 ½" FIPT Inlet
• 5" Lip Extension
• Formal Application

Colorfalls is a lighted weir specifically designed for water features. Fits perfectly in formal retaining walls and pond-free applications. A breathtaking new dimension to a water feature.

Includes: Basin, Colorfalls, Splash Mat, pump, plumbing, PVC spray glue, adjustment valve and Auto Fill, all in one box.

Colorfalls is a lighted weir specifically design for water features. Fits perfectly in formal retaining walls and pond-free applications. A breathtaking new dimension to a water feature.

Colorfalls feature a 5" lip, 20' powercord and includes single outlet InfiColor Smart Module and 12V outdoor transformer

• 1 1/2" (Sch 40) side and back plumbing options for maximum versatility
• Self-draining body for easy winterization
• Redesigned supports eliminate splitting of the water sheer and increase load capacity
• Removable baffle for ease of cleaning and service
• Color Changing LED light bar that is accessible from the rear of the unit
• 16 different colors
• Formal Application

Atlantic Basin Kits are designed to fit perfectly with all of our formal spillways - the Color Changing Colorfalls, the Classic Colorfalls and our new Stainless Steel Scuppers. Whether you're adding the shimmering nighttime enchantment of a Colorfalls or an elegant touch of class with a Stainless Steel Scupper, our Basin Kits provide everything you need to complete the installation, from the reservoir to the plumbing to the pump, with all the fittings, double filtration, splash mat, even an Automatic Fill Valve!

Atlantic’s spillway basins feature a pre-filtered pump chamber, one piece construction and built-in plumbing channels to create a perfect reservoir for formal spillway projects. Add an optional splash mat to reduce splash, conserve water and ensure your pump remains submersed at all times.

Ideal for small statues, vases or rocks where splash is minimal. Has the thickest, strongest grating of any similar product. Roto-molded for superior strength. 

• Pump access door for easy pump removal and cleaning
  
• Fine mesh screen and supports included
• 150 lb. capacity when evenly distributed
• 26" x 26" x 12" tall

The Sturdi-Basin series by EasyPro offers versatility for a variety of statuary pieces. These basins feature clear span grating without legs, facilitating easier pump installation and removal. The bench grating supports approximately 100 lbs., and with concrete blocks placed beneath, the load capacity increases to over 500 lbs.

• Includes fine screen mesh
• Clear span grating - no legs for easy pump installation and removal
• Designed for concrete blocks to sit under grating which greatly increases load capacity!
• 100 lb. load rating with grating only, 500+ lbs. when used with blocks

Vianti Falls stainless steel spillways are a stylish highlight for your patio, entry way or as a stand alone water feature. The soothing sheet of water adds beauty and elegance to any landscape. EasyPro Vianti Falls Spillways are made with stainless steel for maximum strength!

• Available in a variety of sizes and styles
• LED light strips can be used on spillways
• Internal baffle calms incoming water " creating even, smooth flow over lip
• Ideal for formal features, signs and swimming pool features
• Rated for 600 GPH per foot of width
• Max drop of 4 ft. If higher, the water sheet will begin to break apart.

EasyPro Fittings for Vianti Falls Spillway are not included with the spillway.

EasyPro Eco-Series Miniature Pump Vaults are:

• Roto-molded for excellent strength
• Can be used with JAFME extension
• Ideal for mag drive pumps
• Can be used in small Just-A-Falls or custom built fountain basins

EasyPro Pro-Series Pump Vaults are:

• Built heavy duty to withstand the pressure of being buried under rock
• The slots cut in the sides allow water into the pump
• Intake tubes available for JAFM and JAFV to increase flow capacity

Extra strong grate available for the small, medium and large Aqua Falls

• Makes it very easy to cover the falls box with rocks and plants
• The small filter grate is an egg crate shaped material while the medium and large grates are an engineered structural plastic material

Atlantic Scuppers are constructed of 304 stainless steel. Copper finished scuppers have an additional antique copper plating over the stainless steel for a warm traditional look, providing an enticing and durable focal point for fresh water applications in the hardscape.

• Enhances any vertical wall installation 
• Heavy-gauge construction from 304 stainless steel for ageless durability 
• Load bearing body design for trouble free installation 
• Non-clogging weir for open water basin installations and decreased maintenance 

The Altlantic 316 Stainless Steel Spillways were specifically designed for use with chlorinated water. 316 stainless is much more resistant to corrosion than 304 stainless steel. Featuring an integrated grounding lug for use in bonded systems.

• Enhance any vertical wall in the poolscapes, hardscapes and wherever chlorine is used
• Modular design and convenient 4-inch height make Spillways ideal for garden wall block construction
• Readily adaptable to any vertical wall installation
• Structural load bearing design allows for burial in masonry walls
• Non-clogging weir for open water basin installations and decreased maintenance

The Blue Thumb Stainless Steel Formal Falls is the perfect solution to add the beauty of a waterfall into a variety of vertical wall applications. Features a large spillway opening for thick showy water and is self-draining so it won't crack in the winter temperatures. Constructed of stainless steel with a solid top to support stacked blocks, stone, or tile - makes installation easy. Ideal for gardens, pools, outdoor living areas, or even a home or business foyer. Basin Kit Sold Separately.

• Stainless steel construction
• Full top to stack rock
• Self draining - simple to winterize
• Do NOT use in saltwater applications

The EasyPro brass wall scuppers are ideal for adding a formal look to pools and water features, with an endless number of possible applications. Solid brass fixtures with a antique finish for a classic look.

Please note: The antiquing process on each product can create a darker or lighter finish than what is shown.

Perfect for self-contained waterfalls, hardscapes and retaining walls. They are iOS and Android compatible using the Smart Life App, which is available for free within the Apple App Store or Google Play Store. It also works with voice control via Amazon Echo, Alexa, Google Home and Assistant. 

Features 8 pre-programmed scenes: 4 scenes designed as Night, Reading, Party and Leisure while the other 4 scenes; Soft, Rainbow, Shine and Gorgeous can be adjusted based on your mood. You can also set up multiple schedules to turn the lighting on/off according to your desired preset time. Schedules can be repeated daily or weekly.

• Infinite color possibilities w/ adjustable settings
• Works w/ Voice Control via Amazon Echo, Alexa, Google Home and/or Assistant
• 43’ power cord w/ rain-proof transformer & waterproof WiFi controller
• Recommended pump sizes: 1200 GPH for 12” Spillway, 2400 GPH for 24” Spillway

• 12” Spillway: Bottom Mount 1-1/4” FPT Connection with included 3/4” to 1-1/4” Stepped Barbed Fitting
• 24” Spillway: Bottom Mount 1-1/2” FPT Connection
• 12" Spillway Dimension: 12”W x 8”D x 4”H
• 24" Spillway Dimension: 24”W x 8”D x 4”H